LabCab / Clinical Laboratory Casework

Clinical Laboratory Casework

A clinic lab needs a lot of counter, at least one sink, and room for the equipment that comes later. LabCab laboratory casework gives you a continuous work surface wall to wall, with storage above and below sized in simple modules.

Clinical Laboratory Casework by LabCab

A layout that works on day one

Our typical 14 by 12 lab runs casework along one full wall: two sink cabinets, drawer cabinets for consumables, base cabinets for bulk storage and wall cabinets above. The countertop is one run from wall to wall.

The Lab Builder also lets you drop in placeholders for the things we do not make, like a refrigerator, a centrifuge or a biosafety cabinet, so you can check that everything fits before you order.

Tops for wet and chemical work

Solid surface is the standard top. It is seamless, repairable and takes an integral sink bowl. For harsher chemicals choose black compact phenolic, which stands up to stains, solvents and heat.

Either way the top is 1 1/2 inches thick and sits 34 inches above the floor.

Easy to keep clean

Wall and tall cabinets close to the ceiling with a sealed filler, so there is no shelf up top to gather dust. Edges have no glue line. The base lifts off for cleaning underneath.

Lay out your room and see the price in about ten minutes.

Design a labTalk to a planner

More from LabCab